CFXQG - INTERTUF LOW TEMPERATURE, KHA414/AS/AL

Product Identification

Product ID:INTERTUF LOW TEMPERATURE, KHA414/AS/AL
MSDS Date:11/22/1996
FSC:8010
NIIN:01-421-2967
Kit Part:Y
MSDS Number: CFXQG

Responsible Party
COURTAULDS COATINGS, INC. INTERNATIONAL
6001 ANTOINE DRIVE
HOUSTON, TX 77091
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 800-854-6813

Cage: 50411

Contractor
INTERNATIONAL PAINT INC
HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

Ingredients

N-BUTYL ALCOHOL (SARA 313) (CERCLA)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 25-50%

OSHA PEL 100 PPM/STEL C 50

ACGIH TLV: STEL C 50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TRIMETHYLHEXAMETHYLENEDIAMINE

CAS: 25620-58-0

RTECS: MO1451200

Fraction By Weight: 25-50%


PHENOL (SARA 302/313) (CERCLA)

CAS: 108-95-2

RTECS: SJ3327000

Fraction By Weight: 1-10%

OSHA PEL 5 PPM

ACGIH TLV: 5 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: BRAIN/NS DAMAGE (DIZZY,
HEADACHE, NAUSEA). NOSE/THROAT IRRITATION. EYE: IRRITATION. SKIN:
ORGAN DAMAGE, IRRITATION. INGEST: GANGRENE & CORROSION OF THE
LIPS/MOUTH/THROAT/ESOPHAGUS/STOMACH.

First Aid

First Aid:INHAL: GET FRESH AIR, GET MED AID. EYE: FLUSH W/WATER FOR 15
MINUTES OR UNTIL IRRIT SUBSIDES. GET MED AID. SKIN: WASH W/SOAP &
WATER. REMOVE CONTAM CLOTHES/SHOES, WASH BEFORE REUSE, GET MED AID.
INGES T: DONT INDUCE VOMIT. KEEP AT REST, GETPROMPT MED AID.

Fire Fighting

Flash Point:98.0F,36.7C
Lower Limits:1.73
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:REMOVE FROM IGNITS. CLOSED CONTAINERS MAY
EXPLODE IN HIGH HEAT. USE WATER SPRAY, (FOG NOZLES PREFERRED) TO
COOL CONTAINERS. DECOMP PRODUCTS MAY BE TOXIC.

Accidental Release

Spill Release Procedures:CONTAIN SPILL W/SAND/EARTH. DONT USE
COMBUSTIBLE MATERIAL SUCH AS SAWDUST. ABSORB SPILL W/INERT
MATERIAL. PLACE IN CHEMICAL WASTE CONTAINER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED. LOOSEN
CONTAINER CAUTIOUSLY BEFORE OPENING. STORE IN COOL, VENTED AREA
AWAY FROM INCOMPATIBLE MATERIALS, IGNITS & DIRECT *
Other Precautions:* SUNLIGHT. GROUND/BOND CONTAINERS WHEN TRANSFERRING.
EMPTY CONTAINERS MAY BE HAZARDOUS. FOLLOW ALL LABEL WARNINGS EVEN
AFTER CONTAINERS ARE EMPTY.

Exposure Controls

Respiratory Protection:REQUIRED.
Ventilation:REQUIRED.
Protective Gloves:CHEMICAL RESISTANT.
Eye Protection:SAFETY GLASSES/CHEM GOGGLES/FACE SHIELD.
Other Protective Equipment:USE BODY PROTECTION TO AVOID CONTACT
W/PRODUCT.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:243F,117C
Vapor Density:>AIR
Spec Gravity:.946
Evaporation Rate & Reference:Appearance and Odor:LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON DIOXIDE & CARBON MONOXIDE.

Disposal

Waste Disposal Methods:IN ACCORDANCE W/FEDERAL, STATE & LOCAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.